3. FR3092E 串口3的接收中断该如何配置？

FR3092E 串口3的接收中断该如何配置？

  • J

    void Uart_init(unsigned long baud){

    	__SYSTEM_UART3_CLK_ENABLE();
	GPIO_InitTypeDef    GPIO_Handle;
	/* Uart3 IO init */
GPIO_Handle.Pin       = GPIO_PIN_4|GPIO_PIN_5;
GPIO_Handle.Mode      = GPIO_MODE_AF_PP;
GPIO_Handle.Pull      = GPIO_PULLUP;
GPIO_Handle.Alternate = GPIO_FUNCTION_1;
gpio_init(GPIOB, &GPIO_Handle);

//__SYSTEM_UART_CLK_SELECT_COREH();    
Uart3_handle.UARTx = UART3;
Uart3_handle.Init.BaudRate   = baud;
Uart3_handle.Init.DataLength = UART_DATA_LENGTH_8BIT;
Uart3_handle.Init.StopBits   = UART_STOPBITS_1;
Uart3_handle.Init.Parity     = UART_PARITY_NONE;
Uart3_handle.Init.FIFO_Mode  = UART_FIFO_ENABLE;
uart_init(&Uart3_handle);

	NVIC_ClearPendingIRQ(UART3_IRQn);
	NVIC_EnableIRQ(UART3_IRQn);
//NVIC_SetPriority(UART3_IRQn, 0);

    }
    void uart3_irq(void)
    {
    uart_IRQHandler(&Uart3_handle);
    }
    麻烦那位看一下uart3的串口接收中断该如何配置？

    0