3. FR8016ha conn_end,reason:0x00

FR8016ha conn_end,reason:0x00

  • F

    买了两块FR8016ha开发板，烧了官方代码，一块做master，一块做slave. master上打印Start scanning...
    evt_type:0x04,rssi:-3
    content:0x12,0x09,0x53,0x69,0x6D,0x70,0x6C,0x65,0x5F,0x50,0x65,0x72,0x69,0x70,0x68,0x65,0x72,0x61,0x6C,0x02,0x0A,0x00,
    start_con act[0]
    scan_end,status:0x00
    addr_type:0
    bond_check_find_devs_idx:1
    start_enc
    conn_end,reason:0x00
    bond_svc_info_flash_r
    0x10,0x00,0x14,0x00,
    0x63,0x68,0x61,0x72,0x31,0x5F,0x6E,0x74,0x66,0x5F,0x64,0x61,0x74,0x61,
    0x43,0x48,0x41,0x52,0x31,0x5F,0x56,0x41,0x4C,0x55,0x45,
    Link[0]param update,interval:12,latency:55,timeout:600
    这个为什么会蹦conn_end？

    0
    Z
     1 条回复
  • Z
    Global Moderator

    @fu 0_1777339774241_6233e4b8-2589-4382-8818-e4083714f0fb-图片.png

    0
  • F

    你好，那是我误解了？conn_end,reason:0x00 这是一个正常的动作了， 不是链路断开的消息了？
    我拿的是fr801xh_SDK_1043bb7这个里面的SDK，文档也是这个里面的FREQ BLE SDK User Guide V1.0.8.pdf，
    它里面描述 GAP_EVT_CONN_END //!< 主动连接的动作未完成，被主动停止。

    最新的SDK跟文档能给一个链接么？

    0